Autowatch Ghost Immobiliser Installation
The Ghost is the UK's most advanced aftermarket immobiliser designed for CAN buses. It's discreet, doesn't use LED indications or key fobs and is concealed within the wiring of the vehicle.
The user can also disable the system for a short period of time by using Transport Mode when renting their car. This guide will walk you through the process of installing the Ghost immobiliser.
Professional Installation
The Autowatch Ghost immobiliser is a advanced security device that safeguards your vehicle against hacking, key cloning and relay attacks. The system links directly to your car's ECU and is secured by a unique PIN code of your choice. It's inaccessible to thieves using diagnostic scanners or other advanced methods, and it is unable to be disabled by cutting circuits.
The system is simple to use, however professional installation is recommended to ensure a clean connection to the ECU of your vehicle. A Thatcham-approved installer can help with the installation and programming of your Ghost system. They can also suggest a tracking device or alarm to complete your vehicle's protection package.
First, the installer must disconnect your battery to prevent accidental airbag deployment or short circuits. After that, the installer can safely begin work. Basic hand tools are useful for making precise connections and a multimeter can be used to test the electrical properties and safety. Cable tie and insulation tape are essential to protect connections and keep wiring tidy. The Ghost Immobiliser user's guide will provide specific instructions specific to your particular model.
During the installation process, it's essential to choose a grounding point that's free of debris and paint. The installer should ensure that the immobiliser's CAN H and CAN L wires are connected to the appropriate ports on the vehicle's ECU. The wires can be plugged into or soldered based on the model. A top-quality connector is recommended to ensure a durable and reliable connection.
Once the installation is complete Once the installation is completed, the customer can enable Transport Mode. This allows the vehicle to be utilized by valet parking companies or mechanics without having to know the pin code. The customer has to press the icon for service on the dashboard five times in 2 seconds. After this is done, the system will confirm with 5 indication signals.
The Autowatch Ghost 2 immobiliser is TASSA approved and a highly efficient immobiliser. It's a great option for those who regularly rents out their vehicles on platforms such as Turo. Having an immobiliser can also reduce insurance premiums, since it reduces the likelihood of theft.
Getting Started
You won't have a problem with an autowatch immobiliser in order to guard your vehicle from theft. The device stops your car from starting the case that someone steals or copies your key. This is due to its high-tech technology that is designed to prevent the engine from running unless the correct PIN code is entered.
The device connects to the vehicle's bus network, CAN, allowing direct communication with the ECU. It uses the buttons on your dashboard and steering wheel to create a unique sequence which only you are aware of. This makes it impossible for anyone else to start your car. This is the best security system that protects your pride and joy and will ensure its value in the event that you decide to sell it in the future.
Installing a Ghost immobiliser is easy however, you must follow the instructions to avoid electrical problems and system malfunctions. First, you must find a 12V power source and a suitable grounding for the chassis of your car. After that, you are able to begin to connect the wires for the immobiliser. Make use of high-quality connectors and soldering techniques to ensure an effective connection. Also, ensure that you protect the connections by insulating them with heat shrink tubing or insulation tape to shield them from short circuits in electrical power and other issues.
After the wires have been connected, you can reconnect the battery and then turn on the engine to test the function of the immobiliser. When everything is functioning correctly then you can put it in a secure place under the dash or elsewhere in the vehicle. Make sure to hide it in a secure manner to prevent any thief from taking advantage of it.
The Ghost 2 immobiliser is TASSA (Tracker and Aftermarket Security System Association) certified This means it is in compliance with the highest standards of security and is an excellent protection against car thieves. It offers superior protection against key cloning, hacking, and relay attacks, and cannot be disabled without knowing the code. ghost vehicle immobiliser is simple to use, and can be set up to the service valet setting to ensure that your vehicle will not be activated when you take it to an MOT or for servicing.
Wiring
The Ghost Immobiliser, a cutting edge security system, is designed to stop theft of vehicles. It communicates with your vehicle's ECU and directly connects to the CAN bus. In contrast to other aftermarket systems that require the removal of circuit components the Ghost Immobiliser won't interfere with any of the factory settings of your vehicle.
The system is also unnoticeable by thieves using scanners for diagnostics. This is due to the fact that it doesn't send and receive radio frequency signals, and it relies on the CAN data to communicate with your ECU. It doesn't require any modifications to your current key fobs.
Enter your sequence for disarming (either two or one buttons) and then turn on the ignition in your car to use Ghost Immobiliser. The indicator will flash twice to verify that you've entered the correct code. After that, you are able to start your vehicle and drive off in peace.
Once installed The Ghost Immobiliser can protect your car from key cloning and hacking and will also protect the value of your pride and joy. In Transport Mode, you can temporarily disable the Ghost Immobiliser when you need to give your car to service or valet park.
To complete a Ghost Immobiliser installation, you'll have to identify an energy source that is constant (12V) and a grounding point. Be sure that both are properly insulated and can be touched. It's also recommended to use cable ties to bundle and secure the wires, as this will decrease the chance of tampering by potential thieves. To avoid mistakes, double-check these points and mark them with labels or tape. Examine all connections for signs they're wearing out. Be sure to ensure that all connections are firmly in place, and properly protected. Don't forget to test the Ghost Immobiliser after installation is completed. This will make sure that the unit is operating correctly and that all connections and insulation are safe. If there are any issues, make sure to resolve them immediately.
Testing
ghost immobilisers is an innovative vehicle security system that integrates seamlessly with your vehicle's ECU to stop unauthorised motor starting. Its innovative technology protects your vehicle from key cloning, hacking, and other common tactics that thieves employ to steal cars. The Ghost is a perfect complement to existing tracking and alarm systems to provide the best protection for your vehicle. The Ghost's unique features and discreet design make it a preferred choice for car enthusiasts and security-conscious drivers too.
To ensure proper integration of the Ghost Immobiliser, you must to follow all steps of the installation procedure. Consult the wiring diagram of your vehicle to assist you in locating and connecting the wires. The next step is to identify the power source and grounding points. Once you've located them, you will have to mark them so that they are easy to locate when installing. It is also essential to use high-quality tools and materials. Basic hand tools will aid in making precise connections. A multimeter can verify electrical values and guarantee safety. Insulation tape and cable tie will keep all connections neat. A Ghost-specific user manual is also available.
Before you begin installing it is important to test the system by entering the PIN code, then starting the vehicle. This test will verify that the immobiliser is working as it should and will stop vehicle starts that are not authorized. This step should be performed frequently as part of your regular inspections of your vehicle to ensure that the system is always functioning properly.
After the installation has been completed, you can start driving your car with confidence. The Ghost will help keep your pride and joy safe from potential thieves and ensure that nobody is able to take off with your vehicle without the correct PIN. The Ghost can also be paired with a tracker approved by Thatcham to identify any attempts to tamper with or steal your vehicle that could lead to the location of your vehicle in the event of it being stolen.
The Ghost can be utilized in a variety of vehicles and is compatible with all major manufacturers. Monty's Locksmith can assist you in securing your vehicle with this innovative device. Contact us today to learn more about our service and installation options. We are a TASSA Installer who is registered, a certification that guarantees that we adhere to the strictest standards and procedures for installing our products. This ensures customers insurance companies, customers, and law enforcement agencies that installations are carried out safely and correctly.